Cascade series - Multi channel digital power amplifiers
Product Features
Perfect for Home Theatre and multi-channel amplifier installations. Enables customisation of amplifier power needs for any installation regardless of the number of channels. Hot Swap Capability. Easily Stackable Design. Independent Power Supply built in to DPA-M1600 rack unit.
Versatility of Unit Construction
EIA 19" 3U PSU + Rack (DAP-M1600) holds up to 8 amplifier modules, either mono or stereo.
Super-light weight
Only 16Kg/36lb (fitted with 8 modules)
- Two different amplifier module designs
- PM-162d: Stereo module 2 x 100watts / 8 ohms (2 ch)
- PM-301d: Mono module 1 x 300watts / 8 ohms (1 ch)
Two Variations of Rear Panel
- HT type for Home Theatre
- Bl type for Balanced Line
Super Efficient
- Total Conversion Rate of 85%
- Super-low Power Consumption
- High Sound Quaility Circuit Design
- Conforms to Worldwide Safety Standards
- High Impedance capability
- 1/3 Output Power can be Delivered Continuously
- Specifications
|
PM-162d
|
PM-301d
|
| Rated Output |
180W / 8 ohms x 1
300W / 4 ohms x 1
|
300watts/8-ohm x 1ch
|
| T.H.D. |
0.05% (@90W / 8 ohms / 1kHz)
|
| Frequency Response |
5Hz to 25kHz/4-ohm & 5Hz to 50kHz/8-ohm
|
| Distortion |
0.03%(50watts output at 1kHz/8-ohm)
|
| S/N Ratio |
120dB(400Hz to 30kHz BPF)
|
Input Sensitivity
Input Impedance |
1V rms/4.7k-ohm (HT-type)
2V rms/47k-ohm (BI-type)
|
| Resudial Noise |
25uV(400Hz to 30kHz BPF)
|
| Damping Factor |
200(8-ohm,1kHz)
|
| Power Consumption |
45watts/2ch
(1/8 output,100watts/8-ohm)
|
60watts/1ch
(1/8 output,300watts/8-ohm)
|
|
DPA-M1600
|
| Power Supply |
AC230V 50Hz (Europe) / AC120V 60Hz (USA Canada)
|
Dimensions
|
465(w) x 482.6(D) x 132.5(H)mm
18-5/16"(w) x 19"(D) x 5-3/16"(H)
|
